So, it’s a little off the beaten path. But it’s also near a local theater and we live in a house that is not only beautiful but has a lot of character. We are not about to live in a home that is only for entertaining and nothing else. So, we had to make one.
Before we go any further we need to point out that home theater systems can be pretty expensive. Some of the top home theater systems will cost you upwards of $1,000. And we’re not just talking a few hundred here. These systems have to be custom built.
Home theater systems are generally made by using a number of components: a TV, a screen and speakers, cable (and a digital video recorder) and power cords. The components are then placed in a rack that is placed on top of your home. The best rack you can get for home theater systems is a box that will hold a number of these components.
The problem is that with home theater systems, the connections you make between each component are all over the place. And those connections aren’t always made in the same place, either. Some are built into the speakers, some are built into the TV, some are built into the power cords, some are a screw that goes through the TV, some are soldered to the wall, and some are just plain nuts.
I’ve been setting up my HTPC for over a year now, and I still have yet to find the right connection for the speakers, the box that holds the speakers, the power cords, the screw that goes through the TV, the box that holds the power cords, the screw that goes through the TV, and the box that contains the speakers.
There are so many different ways to set up your home theater setup, but I’ve been searching for a while now. I recently ordered the Home Audio Home Theater System from NewEgg, and I’ve had no trouble finding the right place to drill a hole for the power cord, screw that goes through the TV, screw that goes through the wall, screw that goes through the TV, and the screw that goes through the wall.
Just making sure you’re on the right track, there are actually two different ways to set up a home theater. The one I’m talking about is the way that most people set up their setup. The other is more traditional and involves drilling holes in the walls and installing the cables in the correct spot, and then having a wall outlet.
The first option is a lot cleaner for a home theater setup and more flexible, but it can be problematic for any wiring and is rarely used. The second option is easier, and can be used in almost any home. I have seen both options used in my own home and been very impressed with the results.
I’ve read that these two methods can work quite well, but you are not going to find my home theater setup in this article. I chose the second method because it is less hassle, and more flexible. It seems that most people don’t really understand why this is a bad thing.